2-Way Coaxial Antenna Switch
The OPEK CX-201U Coax Switch utilizes a center ground tap that keeps the unused port terminal grounded when not in use. It has Type UHF-Female (SO-239) coaxial connectors and better than 50dB isolation.
As a passive device you can use it in both directions. Two radios and one antenna or one antenna and two radios.
- OPEK: CX-201U
- Rotary Selection
- VSWR: < 1.2:1
- Center Ground Tap
- Impedance: 50-Ohms
- Power Rating: 1kW (cw)
- Frequency: Up to 600 MHz
- Insertion Loss: < 0.2 dB
- Isolation Loss: Better than 50dB
- Coaxial Connectors: UHF-Female (SO-239)
- Mfg. Datasheet - Click Here
- Also available with type N connectors - Click here.
- All coaxial switches - Click here
Other DetailsSee warranty details above
8 Reviews Hide Reviews Show Reviews
Very solidly built, nice feel when switching the antennas, positive engagement. Very solid piece of gear for the price.
Good dependable switch tested up to VHF on field day. I use two of these to switch to 40m and 15m to keep signals separated from adjacent stations so it has good signal separation (isolation) at HF.
The first thing I did when I received the switch was to open the back. What I found was solid, quality construction! I use it in reverse mode feeding one antenna with two transceivers. I highly recommend this switch and AmericanRadioSupply. com
I have a vertical and horizontal antenna feeding the switch, makes it easy to select which one connects to my transceiver.
This antenna switch works great. I have 2 HF Antenna's connected to it. Very well built.
I purchased this switch in conjunction with some PL259-SO239 connectors so that I could permanently rig my main antenna and an emergency antenna to the VHF radio on my boat. In this way, if the primary antenna ( tied into the "A" channel )fails offshore for any reason, re-establishing voice radio transmissions is simply a matter of turning the switch to the "B" channel. The switch is installed on the back of the instrument panel bulkhead inside the cabin, so there are no worries about long-term salt-water exposure, although I think that waterproofing / corrosion-proofing such a switch if need be would not be too difficult. The switch itself is very sturdy and well-made, with brazed solid copper contacts and a heavy-duty powder-coated casing, so it should last a long time even under severe use. The service and pricing at ARS was excellent, as was component availability. I will definitely be sourcing more radio equipment from them in the future. The results have been excellent so far
This is a perfect way for me to share an Antenna between two mobile Transceivers.
Great switch works. well great. construction.