2-Foot - LMR240 Coaxial Cable Assembly Type N Male to N Male
Type N to Type N Male/Male 240 Series Low Loss Cable Jumper is built using high quality components by skilled technicians to ensure a reliable product. The Type N (M) jumper connections are designed to industry standard interface dimensions to ensure superior performance. This high-quality RF coaxial assembly is perfect in many RF Interconnect applications such as Wi-Fi, communications systems, Land Mobile Radio (LMR), and many other RF systems.
The 240 Series coax used in these N (M)-N (M) assemblies is a 0.24 inch diameter coax with a black PE jacket. This cable's foam Polyethylene dielectric is low loss material with a phase velocity of 84% reducing the attenuation when compared to solid dielectric coax. The Low Loss 240 Series coax has a solid center conductor and uses a double shield comprised of a wire braid over a foil tape construction providing >90% shielding effectivity. The construction and materials of the cable result in a coax cable assembly with a 0.75 inch one time bend radius and a repeat bend radius of 2.5 inches. The cable assembly's combination of Type N to Type N (M)/(M) and 240 Series Low Loss Cable supports a maximum operating frequency of 5800 MHz.
For additional strength, these Type N Male to Type N Male cable assemblies have polyolefin heat shrink strain relief boots on both ends of the RF Cable Assembly Jumpers. This double wall epoxy filled heat shrink extends the life of these cables by distributing the stresses applied to the connector/coax attachment.
- Connector: N-Male Both Ends
- Overall Nominal Diameter: 0.240 Inch
- LMR240 Equivalent Coax
- Max Frequency 5.8 GHz
- Shielding Effectivity > 90 dB
- 84% Phase Velocity
- Low Insertion Loss
- Double Shielded
- PE Jacket
- One Time Bend Radius of 0.75 Inches
- Datasheet: PPH-240LL015