Trunk Mounts

Comet RS-730 - Heavy Duty Ham Radio Antenna Lip Mount

Comet RS-730 - Heavy Duty Ham Radio Antenna Lip Mount Heavy-duty universal lip mount. Soft rubber gasket protects the vehicle paint. Four large set screws hold the mount in place, holding from the under-side. Adjusts in three planes, attach to any lip...

AM-210 Ham Radio CB Antenna Trunk Mount SO-239

Antenna Trunk Lip Mount - UHF Connector Antenna Connector: SO-239 (UHF-Female) Cable Connector: PL-259 Coaxial Cable: RG-58/U Cable Length: 17-Foot    

AM-209 - NMO Antenna Truck Mount - PL-259 RG-58 Coax Cable

NMO Antenna Truck Mount - PL-259 17 Ft. Coax Antenna Connector: NMO Cable Connector: PL-259 Coaxial Cable: RG-58/U Cable Length: 17-Foot  

NMO Heavy Duty Lid Trunk Hatch Back Antenna Mount OPEK AM-204-7C

AM-204-7C - Heavy Duty Lid Trunk - NMO Heavy duty trunk lid - hatch back mount. Universal mobile mount. Two-Axis adjustment gives flexibility in mounting location. Mount possibilities include trunk lid, hatch back, vertical door, etc.  Recommended...

AM-204-7LA - Heavy Duty Lid Trunk Hatch Back Antenna Mount SO-239

Heavy Duty Lid Trunk Antenna Mount - SO-239 Heavy duty trunk lid - hatch back mount. Universal mobile mount. Two-Axis adjustment gives flexibility in mounting location. Mount possibilities include trunk lid, hatch back, vertical door, etc. ...

Comet RS-720-NMO - Medium Duty Ham Radio Antenna Lip Mount

Comet RS-720-NMO - Medium Duty Ham Radio Antenna Lip Mount Attach to any lip on the vehicle, vertical or horizontal, as long as the lip is no more than 1/4" thick.  The mount will adjust to vertical. Recommended for antennas up to 60 inches tall...

OPEK Mobile Antenna Trunk Mount - Two In One NMO UHF Connectors

OPEK Mobile Antenna Trunk Mount -'Two-In-One' NMO & UHF If you have an NMO mount and need to install an antenna with a UHF (PL-259) connector there is a simply solution. The OPEK NMO-8 adapter coverts a NMO connector to a UHF (SO239). This is a must...

Comet RS-840 - Heavy Duty Ham Radio Antenna Lip Mount

Comet RS-840 - Heavy Duty Ham Radio Antenna Lip Mount The strongest of all Comet lip mounts, the RS-840 has a support tab that crosses over the gap between the trunk/door edge to give it additional strength. The surface across the gap should be flush...

Comet HD5-3/8-24 Heavy-Duty Trunk Lip Mount Ham Radio Antenna Bracket

Comet HD5-3/8-24 Heavy-Duty Antenna Mount Bracket The Comet HD-5 3/8-24 is a heavy-duty lip mount with a 3/8-24 threaded socket to accept small screw-driver antennas, CB antennas, etc.  The RS-840 mount equipped with the deluxe coax cable assy with...

Comet 3D4MB - Standard Mobile Antenna Lip Mount Cable Assembly

Comet 3D4MB - Standard Mobile Antenna Lip Mount Cable Assembly Comet's 3D4M antenna mount can be used as a lip mount or used alone as permanent hole mount.  An o-ring is included to seal moisture from migrating under the threaded nut holding the...

Comet RS-720 - Medium Duty Ham Radio Antenna Lip Mount

Comet RS-720 - Medium Duty Ham Radio Antenna Lip Mount Attach to any lip on the vehicle, vertical or horizontal, as long as the lip is no more than 1/4" thick.  The mount will adjust to vertical. Recommended for antennas up to 60 inches tall...

Comet 3D4N - Standard Mobile Antenna Lip Mount Cable Assembly

Comet 3D4N - Standard Mobile Antenna Lip Mount Cable Assembly Comet's 3D4M antenna mount can be used as a lip mount or used alone as permanent hole mount.  An o-ring is included to seal moisture from migrating under the threaded nut holding the...