Below are the available bulk discount rates for each individual item when you purchase a certain amount
RG-8X / LMR240 - Type N Male Plug Coaxial Crimp Connector
The G306-8X Type N Male Plug Coaxial Crimp Connector is a 50-ohm RF connector designed for use with many coaxial cables including RG-8X, LMR-240, and Belden 7808A coaxial cables. Its threaded Type N interface provides a secure, reliable connection for RF, communications, antenna, wireless, and high-frequency applications.
Key Features
Designed for Large-Diameter Coax
The G306-8X is intended for heavy-duty coaxial cables where a standard connector will not accommodate the larger cable diameter. The approximately 0.240 inch cable entry provides the proper fit for RG-8X, LMR-240, and Belden 7808A coaxial cables and other similar coaxial cables.
Installation
The connector is installed by preparing the coaxial cable according to the recommended stripping dimensions, attaching the center contact, inserting the cable into the connector body, and crimping the outer ferrule/sleeve to secure the cable shield. Proper cable preparation and the correct crimp tooling are essential for achieving reliable mechanical retention and RF performance.
Applications
Please verify the cable's actual outside diameter and connector interface before ordering. Coaxial cables can vary by manufacturer, and this connector is intended for approximately 0.240-inch OD coaxial cable.
Attention California Residents: Proposition 65 WARNING - Some of the products purchased through our website may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. More Info ›
When placing an order on our website you are agreeing to our Terms of Service.