Product Description
LMR-600 Type N Male Plug Coaxial Crimp Connector – G306-L600
The G306-L600 Type N Male Plug Coaxial Crimp Connector is a 50-ohm RF connector designed for use with large-diameter coaxial cables such as LMR-600, RG-217, and other cables with an approximately 0.590-inch (15 mm) outside diameter. Its threaded Type N interface provides a secure, reliable connection for RF, communications, antenna, wireless, and high-frequency applications.
Key Features
- Part Number: G306-L600
- Connector Type: Type N Male Plug
- Cable Compatibility: LMR-600, RG-217 and similar 0.590" OD coaxial cable
- Impedance: 50 Ohms
- Connection Style: Crimp
- Center Contact: Solder/crimp attachment
- Body: Machined brass construction
- Center Contact: Gold-plated brass
- Insulator: PTFE
- Threaded Type N interface for a secure, vibration-resistant connection
- Suitable for RF, wireless, cellular, antenna, communications, and test equipment applications
Designed for Large-Diameter Coax
The G306-L600 is intended for heavy-duty coaxial cables where a standard connector will not accommodate the larger cable diameter. The approximately 0.590-inch cable entry provides the proper fit for LMR-600, RG-217 and other compatible large coaxial cables.
Installation
The connector is installed by preparing the coaxial cable according to the recommended stripping dimensions, attaching the center contact, inserting the cable into the connector body, and crimping the outer ferrule/sleeve to secure the cable shield. Proper cable preparation and the correct crimp tooling are essential for achieving reliable mechanical retention and RF performance.
Applications
- Cellular and wireless infrastructure
- Base station and antenna systems
- RF communications equipment
- Microwave and high-frequency systems
- Test and measurement equipment
- Distributed antenna systems
- Commercial and industrial RF installations
Please verify the cable's actual outside diameter and connector interface before ordering. LMR-600 and RG-217 cables can vary by manufacturer, and this connector is intended for approximately 0.590-inch OD coaxial cable.
