OPEK

NMO-2N - 3/8-Inch NMO Cable Connector with Protector

NMO-2N - 3/8-Inch NMO Cable Connector Quality matters and American Radio Supply is a trusted supplier of genuine OEM components. We supply the U.S. Armed Forces and RF Communication Professionals worldwide. 3/8" NMO Antenna Connector Machined Brass not...

OPEK AM-205C - Stainless Steel Trunk Antenna Mount - 16mm Hole

Stainless Steel Trunk Antenna Mount Height: 3.25" Width: 3.375" Depth: 2.50" Stainless Steel Construction 5/8-Inch (16 mm) Antenna Mounting Hole Includes Protective Strips to Prevent Body Damage  

OPEK AM-207D-1/2 Right Angle 3/8-24 Stud to PL-259 Antenna Cable Mount

3/8"-24T Right Angle Stud to PL-259 Antenna Cable Mount Here is another unique radio product from OPEK. Features: Right Angle 3/8-24 Threaded Stud Cable: RG-58A/U Coax Cable Coax Cable Length: ~ 17-Foot Connector: PL-259 (UHF-Male) Fits 1/2"...

AM-302B 3-Way Aluminum Mirror Antenna Mount with 3/8" x 24T Stud

AM-302B - 3-Way Aluminum Mirror Antenna Mount with 3/8" x 24T Stud 3-Way Aluminum Antenna Mirror Mount with 3/8" x 24T Stud. P/N: AM-302B Aluminum Bracket 3/8-24 Stud Antenna Mount  

Helium Network - Type N Stainless Steel Antenna Bracket - FF

Type N - Stainless Steel Antenna Mounting Bracket Quality matters and American Radio Supply is a trusted supplier of genuine OEM components. We supply the U.S. Armed Forces and RF Communication Professionals worldwide. This robust 'heavy-duty'...

OPEK AM-203 - Stainless Steel Antenna Trunk Mount

OPEK AM-203 - Stainless Steel Antenna Trunk Mount Strong stainless steel antenna mount with 16 mm mounting hole to accommodate 5/8-inch connectors such as the Type UHF-Female (SO-239) and Type N-Female.  OPEK: AM-203 16 mm Mounting...

2021-2024 - Ford Bronco Sport - No Drill Antenna Mount Bracket - PCM

2019-2024 - Ford Bronco Sport - Antenna Bracket Our 'No Hole' / 'No Drill' Antenna Mounting Bracket allow you to mount your antenna without damaging your truck SUV. These brackets use your vehicle's existing fender bolts to secure the mount. ...

PCM-MH1X - Magnetic Microphone Clip Hanger - Mic Clip

PCM-MH1X - Magnetic Microphone Clip Magnetic Microphone Clip Designed for all Microphones with Standard Hanger Buttons  

50-Ohm VHF UHF Dummy Load 10-Watt DC to 3 GHz SMA-Male - ARS-4831

50-Ohm - Dummy Load - DC to 3 GHz Our 'Low-Loss' RF Termination has an integral Type N Male connector which allows direct connection to the transmitter. No coaxial cable required. It's aluminum air-cooled heatsink absorbs 50-watts peak, and 25-watts...

AM-304SB - Black Anodized Aluminum Antenna Mount 3/8"-24T to Bolt Stud

AM-304SB - 3-Way Double Groove Black Anodized Aluminum Antenna Mount 3-Way 'Double Groove' Aluminum Antenna Mirror Mount with SO-239 to 3/8-24 Antenna Mounting Stud. 3/8"-24 to Bolt Stud Antenna Mounting Stud Double Groove Black Anodized...

4-Pin - Microphone & Electrical Connector M16 Diamond Panel Front Mount

4-Pin - Ham & CB Radio Microphone Electrical Connector - Panel Mount Use in low voltage electrical applications and microphones. Mates with 357-7xx series connectors. Quality matters and American Radio Supply is a trusted supplier of genuine...

OPEK AM-207D-5/8 Right Angle 3/8-24 Stud to PL-259 Antenna Cable Mount

3/8"-24T Right Angle Stud to PL-259 Antenna Cable Mount Here is another unique radio product from OPEK Right Angle 3/8-24 Threaded Stud Cable: RG-58A/U Coax Cable Coax Cable Length: ~ 17-Foot Connector: PL-259 (UHF-Male) Fits 5/8" Mounting...