Product Description
No Hole - Antenna Mounting Bracket
Comet Antenna 'No Hole' Antenna Mounting Bracket allow you to mount your antenna without damaging your truck SUV. These brackets use your vehicle's existing fender bolts to secure the mount. Protecting your vehicle's paint.
- Fits 2021 - 2027 - Ford F-150 ( PASSENGER SIDE )
- Stainless Steel Construction
- 3/4-Inch (16 mm) Antenna Mounting Hole
Recommended cable and adapters
- Cable Assembly NMO-3417
- 3/8-24 Adapter NMO-38
- 3/4" to 5/8" - Hole Reducer Kit
- 3/4" to 1/2" - Hole Reducer Kit
Instructions
- Set Parking Brake. Open hood and locate the 10 mm bolt near the back of the front fender. Remove bolt.
- Align the antenna bracket with the bolt hole, reinstall the bolt and tighten. Note: To avoid galvanic corrosion between the aluminum body and the stainless steel bracket, the stainless steel star washer should be placed ONLY between the bolt and bracket and should not penetrate surface. Refer to Ford Service Bulletin: Q-222R1
[STAFF NOTE] Due to weight considerations, installing the ATAS-120 or similar HF antennas is not recommended. These antennas are generally heavier than most VHF/UHF dual-band antennas. Some customers have reported slight wobble when using heavier HF antennas with the FO4 bracket. The bracket’s right-angle design, combined with the additional weight, may result in reduced stability.
Other Details
See warranty details aboveProduct Videos
Custom Field
Product Reviews
4 Reviews Hide Reviews Show Reviews
-
Great
Fits perfectly
-
Excellent Product
Excellent product. Fit perfectly. Easy to install. The bracket is manufactured with a film to prevent corrosion of the aluminum F-150 truck body.
-
Works Perfectly
Works perfectly. I have two of them.
-
Recommended
Easy to install and a solid product. I had more trouble running coax and power into the truck. Heavy enough that there is no flex in the mount and the antenna stays still. Would recommend it to anyone with a 2021 or later Ford F-150.
