Firestik SS3H | Heavy Duty Stainless Steel Antenna Spring | 3/8-24

Firestik SS3H | Heavy-Duty Stainless Steel Spring | 3/8-24 Thread Every antenna should have a spring. Springs protect the antenna, mount and vehicle. These springs are made from long lasting, top grade electro-polished stainless steel. The upper and...

Firestik SS3M | Medium Duty Stainless Steel Antenna Spring | 3/8-24

Firestik SS3H | Heavy-Duty Stainless Steel Spring | 3/8-24 Thread Every antenna should have a spring. Springs protect the antenna, mount and vehicle. These springs are made from long lasting, top grade electro-polished stainless steel. The upper and...

K1A | 3/8-24 Threaded Antenna Quick Disconnect | Chrome

3/8-24 Threaded Antenna Quick Disconnect There are times when it is convenient to be able to quickly remove your antenna without fumbling around for tools. Perhaps your antenna is too tall to fit into your garage, or you often park in a high theft area...

K4R | 3/8-24 Threaded Antenna Stud Mount With Ring Bolt

K4-R | 3/8-24 Threaded Antenna Stud Mount with Ring Bolt The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient transfer...

Firestik K4A | 3/8-24 Threaded Antenna Stud Mount With SO239 Connector

Firestik K4A | 3/8-24 Threaded Antenna Stud Mount | SO-239 Connector The Firestik  K4-A stud mount has been praised by communications professionals for 20 years. You can actually pay more for a stud mount but you certainly will not get more than...

Firestik K4 | 3/8-24 Threaded Antenna Stud Mount With Bolt Lug

Firestik K4 | 3/8-24 Threaded Antenna Stud Mount with Bolt Lug The importance of the stud mount cannot be over stressed! The antenna stud mount acts as a bridge between the antenna and the coaxial feedline. Accordingly, it needs to allow for efficient...

Firestik AR10 - In-Line UHF Lightning Static Arrestor Surge Protector

Firestik AR10 - In-Line UHF Lightning Static Arrestor Surge Protector Disconnect the coaxial connector at your base antenna, install the AR-10 and reconnect the coaxial cable. Then, run a copper ground wire from the connector housing to earth ground...

Diamond RHF40 | Dual-Band HT Antenna for Ham Radio Handheld Radio BNC

Diamond RHF40 - Dual-Band Antenna for Dual Band Handheld Ham Radios Another fine product from Diamond Antenna. Specifications: Bands: 2M | 70cm Frequency: 144 MHz | 440 MHz Relative Gain: 6 dB * Excellent Gain Thru 900 MHz Power:...

Diamond KB144 - Side Mount Ham Radio Antenna Bracket

Diamond KB144 - Side Mount Ham Radio Antenna Bracket Support boom element for a single antenna, and will support a mast diameter up to 1 3/4 inches (i.e. the A144S5 beam). New Old Stock (NOS)  

Diamond BNCP-SMAJ | SMA to BNC Ham Radio HT Radio Coax Adapter

Diamond BNCP-SMAJ | BNC-Male to SMA-Female Coax Adapter Used to convert SMA connector handheld radios to BNC. Low profile design reduces amount of torque applied to the handheld antenna connector. Sleek one-piece design, black in color with gold...

Comet SMA-503J - Dual-Band HT Ham Radio Antenna SMA Female for Wouxun

Comet SMA-503J - Dual-Band HT Ham Radio Antenna SMA Female for Wouxun Another great handheld radio antenna from the antenna specialists at Comet. Super Flexible and Lightweight.  Made from the same material as unbreakable eyeglass frames...

Comet HM05JSJ Reverse SMA Female Coax Pigtail Jumper fits Wouxun Radio

Comet HM05JSJ - Reverse SMA-Female Coaxial Jumper for Wouxun Radios This 18-Inch Long RG-174 coaxial cable is used to reduce the stress to the SMA connector on your hamdheld HT radio. This pigtail jumper fits Wouxun models KG-UV3D, KG-UVA1, KG-833 and...